X-FMOA-10 FRICTION MOUNT OFFSET ADAPTER


A) Unscrew the retaining ring from the friction mount and put to the side.

B) Tilt the head of the friction mount 90º and unscrew the tightening knob.

C) Screw the tightening knob and retaining ring into the threaded end of The X-FM-10

D) Take assembly and screw into the friction mount with the supplied 1/4-20″ screw.


E) Screw in accessory (monitor, light, etc.) by using the tightening knob. Determine if the tension needs to be adjusted due to the weight of the accessory. If so, make adjustments using the silver tension knobs located at the bottom of the friction mount.


We recommend that the cable for your accessory be long enough to reach from it´s connection point to the end of the Xtender arm at full extension.