MM-10 MONITOR/LIGHT ATTACHMENT


A) Screw the threaded shaft into the threaded end of The Xtender´s head. Once the shaft in tight, lock into place by tightening the allen head screw in The Xtender´s head with the supplied wrench, Next screw the tension wheel onto the threaded shaft a few turns.

B) Attach accessory (light, monitor, etc.) by screwing onto the threaded shaft. Then tighten the tension wheel snugly under the accessory. Determine if tension needs to be adjusted on The Xtender due to the weight of the accessory, if so make adjustments with the wrench provided.



We recommend that the cable for your accessory be long enough to reach from it´s connection point to the end of the Xtender arm at full extension.